Mercedes-Benz 2013 C-Class W204 Sedan, Руководство пользователя

Страница: 111 / 412

feature, it opens again slightly. The rain-
closing feature is then deactivated.
The panorama sliding sunroof does not close
if:
R
it is raised at the rear.
R
it is blocked.
R
no rain is falling on the area of the wind-
screen being monitored by the rain sensor,
e.g. because the vehicle is under a bridge.
Operating the panorama sliding sun-
roof roller sunblinds
General notes
The roller sunblinds shield the vehicle interior
from sunlight. The two roller sunblinds can
only be opened and closed together when the
panorama sliding sunroof is closed.
G
WARNING
When opening or closing the roller sunblind
parts of the body could be trapped between
the roller sunblind and the frame or sliding
sunroof. There is a risk of injury.
When opening or closing make sure that no
parts of the body are in the sweep of the roller
sunblind.
If someone is trapped:
R
release the switch immediately or
R
press the switch in any direction during the
automatic opening/closing process
The opening/closing process is stopped.
Roller sunblinds reversing feature
The roller sunblinds are equipped with an
automatic reversing feature. If an object
blocks or restricts the roller sunblind during
the closing process, the roller sunblind opens
again automatically.The automatic reversing
feature is however only an aid and is no sub-
stitute for your attention when closing the
roller sunblind.
G
WARNING
The reversing function does not react:
R
to soft, light and thin objects, e.g. small fin-
gers
R
when closing the roller sunblind again man-
ually immediately after automatic reversing
This means that the reversing function cannot
prevent someone being trapped in these sit-
uations. There is a risk of injury.
When closing make sure that no parts of the
body are in the sweep of the roller sunblind.
If someone is trapped:
R
release the switch immediately or
R
press the switch in any direction during the
automatic opening/closing process
The closing process is stopped.
Opening and closing
Overhead control panel
:
To open
;
To open
=
To close
X
Turn the key to position 1 or 2 in the ignition
lock.
X
Press or pull the
3
switch in the corre-
sponding direction.
i
If you press the
3
switch beyond the
point of resistance, an automatic opening/
closing process is started in the corre-
sponding direction. You can stop automatic
operation by pressing again.
Sliding sunroof
109
Opening and closing
Z