Mercedes-Benz 2011 C 250, Руководство оператора, Страница: 237 / 320

Clearing the remote control memory
X
Turn the SmartKey to position 2 in the
ignition lock.
X
Press and hold transmitter buttons
;
and
?
for approximately 20 seconds until
indicator lamp
:
flashes rapidly.
The memory is cleared.
i You should clear the remote control
memory before selling the vehicle.
Compass
To obtain correct direction display in rear-
view mirror
:
, the compass must be
calibrated and the magnetic field zone set.
X
To call up the compass: briefly press
button
=
.
The compass indicates the direction in
which the vehicle is currently driving:
N
,
NE
,
E , SE , S , SW , W or NW .
X
To calibrate the compass: determine
your position using the following the zone
maps.
Zone map for North America
Zone map for South America
X
Press and hold button
=
for approximately
three seconds.
The currently selected zone appears in
compass display
;
.
X
To select the zone: press button
=
repeatedly until the desired zone is
selected.
The zone has been selected when compass
display
;
shows the point of the compass.
This takes a few seconds.
X
To calibrate the compass: make sure that
there is sufficient space for you to drive in
Features
235
Loading, stowing and features
BA 204 USA, CA Edition A 2011; 1; 5, en-US
hereepe
Version: 3.0.3.6
2010-05-20T09:17:30+02:00 - Seite 235
Z