Mercedes-Benz 2011 C 250, Руководство оператора

Страница: 134 / 320

If you cannot turn the SmartKey in the ignition
lock, the vehicle battery may not be charged
sufficiently.
X
Check the vehicle battery and charge if
necessary (
Y
page 261).
or
X Jump-start the vehicle (
Y
page 262).
i The SmartKey can be turned in the
ignition lock even if it is not the correct
SmartKey for the vehicle. The ignition is not
switched on. The engine cannot be started.
KEYLESS-GO
Vehicles with KEYLESS-GO are equipped with
a SmartKey with an integrated KEYLESS-GO
function and a detachable Start/Stop button.
The Start/Stop button must be inserted in the
ignition lock and the SmartKey must be in the
vehicle.
Pressing the Start/Stop button several times
in succession corresponds to the different
key positions in the ignition lock. This is only
the case if you are not depressing the brake
pedal.
If you depress the brake pedal and press the
Start/Stop button, the engine starts
immediately.
The Start/Stop button can be removed from
the ignition lock. Then you can insert the
SmartKey in the ignition lock.
i You do not have to remove the Start/Stop
button from the ignition lock when you
leave the vehicle. However, you should
always take the SmartKey with you when
leaving the vehicle. The vehicle can be
started with the Start/Stop button and the
electrical equipment can be operated while
the SmartKey is in the vehicle.
:
Start/Stop button
;
Ignition lock
X
Insert Start/Stop button
:
into ignition
lock
;
.
i When you insert Start/Stop button
:
into ignition lock
;
, the system requires a
detection time of two seconds before you
can use Start/Stop button
:
.
X Vehicles with manual transmission: shift to
neutral.
or
X
Vehicles with automatic transmission: shift
the transmission to position
N.
X
Do not press the brake pedal.
Start/Stop button
=
USA only
?
Canada only
132
Driving
Driving and parking
BA 204 USA, CA Edition A 2011; 1; 5, en-US
hereepe
Version: 3.0.3.6
2010-05-20T09:17:30+02:00 - Seite 132