Mercedes-Benz 2011 C 250, Руководство оператора, Страница: 116 / 320

Standing lamps/parking lamps
X
Switch off the lights.
X
Open the hood.
X
Turn housing cover
:
counter-clockwise
and pull it out.
X
Pull out bulb holder
;
.
X
Take the bulb out of bulb holder
;
.
X
Insert the new bulb into bulb holder
;
.
X
Insert bulb holder
;
.
X
Align housing cover
:
and turn it
clockwise until it engages.
Turn signals
X
Switch off the lights.
X
Open the hood.
X
Turn bulb holder
:
counter-clockwise and
pull it out.
X
Turn the bulb counter-clockwise, applying
slight pressure, and remove it from bulb
holder
:
.
X
Insert the new bulb into bulb holder
:
and
turn it clockwise while applying slight
pressure.
X
Place bulb holder
:
in the headlamp so
that retainer
=
is upright and mark
;
is
at the top.
X Insert bulb holder
:
into the lamp and turn
it clockwise.
Changing the rear bulbs
Opening/closing the side trim
You must open the side trim panel in the trunk
before you can change the bulbs in the tail
lamps.
Left-hand side trim panel
Right-hand side trim panel
114
Changing bulbs
Lights and windshield wipers
BA 204 USA, CA Edition A 2011; 1; 5, en-US
hereepe
Version: 3.0.3.6
2010-05-20T09:17:30+02:00 - Seite 114