Mercedes-Benz 2003 CL 500, Руководство оператора

Страница: 107 / 384

107
Controls in detail
Memory function
Storing exterior rear view mirror park-
ing position
For easier parking you can adjust the pas-
senger exterior rear view mirror so that you
can see the right rear wheel as soon as you
engage reverse gear
R .
For information on activating the parking
position, see “Setting parking position for
exterior rear view mirror” (
컄
page 142).
The buttons are located on the driver’s
door.
1 Exterior rear view mirror
2 Adjustment button
M Memory button
왘
Stop the vehicle.
왘
Switch ignition on (if not already on).
왘
Press button 1 .
The passenger-side exterior rear view
mirror is selected.
왘
Adjust the exterior rear view mirror
with button
2 so that you see the rear
wheel and the road curb.
왘
Press memory button M .
왘
Within three seconds, press bottom of
adjustment button
2 .
The parking position is stored if the
mirror does not move.
i
You can store a parking position for the
passenger-side exterior rear view mir-
ror for each key or KEYLESS-GO* card.
i
If the mirror does move, repeat the
above steps. After the setting is stored
you can move the mirror again.