Mercedes-Benz 2003 C 230 Kompressor Sport, Руководство оператора

Страница: 294 / 376

294
Practical hints
Replacing bulbs
왘
Twist bayonet socket 5 counterclock-
wise to the stop (do not remove).
왘
Pull the bulb out of the socket.
왘
Insert the new bulb so that the base
locates in the recess in the bayonet
socket
5 .
왘
Twist bayonet socket clockwise until
you hear it snap into place.
왘
Plug the connector onto the bulb.
왘
Align headlamp cover 2 and click into
place.
Front turn signal lamp bulb
왘
Switch off the lights.
왘
Open the hood (
컄
page 235).
왘
Twist bulb socket 1 counterclockwise
and pull out.
왘
Push bulb into socket, turn counter-
clockwise and remove.
왘
Insert new bulb in socket, push in and
twist clockwise.
왘
Reinsert bulb socket in lamp and twist
clockwise.
Parking and standing lamp bulb
왘
Switch off the lights.
왘
Open the hood (
컄
page 235).
왘
Press the clamp and remove headlamp
cover
2 .
왘
Pull out the bulb socket 6 with the
bulb.
왘
Pull the bulb out of the bulb socket.
왘
Insert a new bulb in the socket.
왘
Reinstall the bulb socket.
왘
Align headlamp cover 2 and click into
place.
Side marker lamp bulb
왘
Switch off the lights.
왘
Carefully slide lamp towards rear.
왘
Remove front end first.
왘
Twist bulb socket counterclockwise
and pull out.
왘
Pull bulb out of the bulb socket.
왘
Insert new bulb in socket.
왘
Reinstall bulb socket, push in and twist
clockwise.
왘
To reinstall lamp, set rear end in
bumper and let front end snap into
place.