WALL CONTROLLER INSTALLATION INSTRUCTIONS
7
Rev 2.0
•
Do not mount wall controller near heat producing equipment.
•
The wall controller provided is designed to be connected with the ceiling fan supplied in this
package only. Other uses may cause personal injury or fire hazard.
•
Make sure electricity is turned off at the main power box before commencing work. Turn off
the power by removing fuse or turning off circuit breaker before installing the wall controller.
HOW TO INSTALL WALL CONTROLLER
1.
Disconnect the power and remove the existing wall plate and switch (if any).
2.
Set the speed control knob on the wall controller in the off position.
3.
Tighten screws on the terminal blocks and make sure wire connections are secure.
4.
Secure the wall controller to the wall with two screws provided.
