EN
43
1.
When the steam mop is upright or the main body is in the upright position, the pump
will turn off and stop steaming within 15 seconds, and go into stand by mode.
2.
When the steam mop is not moved for 15 seconds, the pump will turn off and stop steaming
within several seconds, and go into stand by mode.
3.
When the steam mop is in stand by mode and it is not moved for 20 seconds, the steam mop
automatically shuts off. Press the ON/STAND BY button to resume (fig. 7).
Manual shut-off
Keep the ON/STANDBY button (fig. 7) pressed in until the LED on the button flashes red to turn off
the steam.
AFTER USE
NOTE:
Always make sure the mop is unplugged after use.
1.
Unplug the cord from the socket and place the mop in the upright position. Let the steam
mop cool for 2-3 minutes.
2.
Remove the microfiber pad from the velcro to avoid contact with the hot pad or dirt (fig. 11).
3.
Empty the water tank before storage. Remove the water tank cap and empty the tank over a
sink. Replace the water cap. (Fig. 12)
4.
To store the steam mop hanging up, first remove the head (after it has cooled and the steam
has been released) and then hang on a large hook (fig. 13).
11
12
13
