EN
40
• When you are using the mop for the first time, it might take longer than the normal 15 seconds
to produce steam. There may be a little water in or around the water tank due to tests carried
out on all steam mops in the factory.
STARTING
IMPORTANT!
Make sure you only add water to the tank. Chemicals or cleaning agents may damage
the appliance and could be unsafe for you and your surroundings.
1.
Filling with water. (Fig. 4)
– Turn and remove the cap from the water tank.
– Pour water into the tank to the water line.
– Replace the cap on the water tank.
2.
Fit the microfiber pad. (Fig. 5)
3.
Roll out the cable by pulling and turning the cable holder (fig. 6). Plug into a 230 volt
electrical socket, the ON/STANDBY (fig. 7) button is now lit red.
ACTIVATE STEAM
NOTE:
When the water tank is empty, the steam mop will stop producing steam. You can refill the
water tank at any time as long as the mop is unplugged from the mains.
1.
Press the ON/STANDBY button (fig. 7) once to start the DUST setting. The related indicator
4
5
6
