EN
39
INSTALLATION
NOTE:
Use a screwdriver for flat head screws. Screwdriver not included.
1.
Connect the handle to the pole and screw in place using the M4X28 mm screws (fig. 1).
2.
Connect the pole with the body and screw in place using the M6X45 mm screws (fig. 2).
3.
Connect the mop head to the body and screw in place using the M4X10 mm screws (fig. 3).
OPERATION
WARNING!
• Ensure at all times that the mop is not connected to the mains when filling with water, connecting
the mop head or removing the microfiber pad.
• The steam mop needs water to produce steam. Never use the steam mop without water in the tank.
• Make sure you do not use the mop without attaching a microfiber pad.
NOTE:
• Wipe or vacuum your floors prior to cleaning with the steam mop.
• When the microfiber pad gets dirty, please replace it with a new one before continuing cleaning.
2
3
1
A. Adjustable Telescopic Pole Handle
B. Pole
C. Ergonomic Mop Handle
D. Easy Release Rotational Cord Clip
E. Screws
F. Water Tank Cap
G. The ON/STANDBY button
H. Steam Mop Body
I. Water tank
J. Standalone Ball Swivel Head
K. Microfibre pad
L. Carpet Glider