4
3
Product Description
3.1
General information
The MENNEKES AMTRON
®
Wallbox is a charging station for
use in private and semi-public areas, such as private land,
company car parks and depots.
The charging station is used exclusively for charging
electrically powered vehicles.
Mode 3 charging according to IEC 61851-1:2010.
Plugs and sockets according to IEC 62196.
The charging station is operated as a stand-alone solution or
with connection to a higher-level back-end system.
The charging station is intended solely for fixed installation.
Features:
Status information through LED info bar.
Integration into the home network over WLAN / LAN.
RS485 interface for wired networking with a MENNEKES
ACU or MENNEKES E-Mobility Control Panel (SCU
mode).
Charge APP for controlling the charging process and
displaying statistical data.
MENNEKES HC controller, communication and control
unit.
Multi-function button (termination of charging process,
RCCB test, re-activation of RCCBs and CBs).
Unlocking function in case of power failure for charging
with charging plug type 2 (mode 3) (only for devices with
charging plug type 2).
Enclosure made of AMELAN.
Integrated cable storage.
Wired ready for connection.
3.2
Optional equipment
Depending on the version of the charging station, the
following optional features are available:
Connector systems
Fig. 1
Depending on the version, the charging station is equipped
one of the following connector systems:
A
Charging socket type 2 for use with separate charging
cable.
B
Permanently connected charging cable with charging
connector type 2.
C
Permanently connected charging cable with charging
connector type 1.
Wechs el ein- auf z weis paltig
