Mendip Stoves Christon 550, Руководство по эксплуатации и установке

Страница: 8 / 28

8 of 28
Mendip Stoves are fi�ed internally with vermiculite heat deflec�on panels and baffles, these panels are designed to ensure the
maximum efficiency and are an integral part of the clean burn process of the stove. These baffles should not be removed other
than for cleaning the stove. Any defec�ve panels should be replaced, small hairline cracks do not need immediate replacement,
however hairline cracks will develop during long term use and should be monitor regularly. When refuelling your stove place
wood fuel into the chamber, impact from logs can cause the heat deflec�on panel to crack
.
Connec�on to chimney
Christon models are built with a top flue outlet as standard. Care should be taken to ensure an air�ght fit if or when refi�ng
a collar. This collar allows connec�on to either a masonry chimney or a prefabricated factory made insulated metal chimney.
COMBUSTION CHAMBERS
INSTALLING A CHRISTON INSET
N.B. Inset models are supplied with a stainless steel adapter which allows direct connec�on to a stainless steel
chimney liner. ( See adapter shown on Christon 550 drawing)
H
W
D
Building in Dimensions Height Width Depth
CHRISTON 550 570 mm 570 mm 380 mm
CHRISTON 750 570 mm 770 mm 380 mm
DO NOT OBSTRUCT THE AIR INTAKE
At least 20mm clearance should be le� between the outer casing of the rear of the stove and the wall
If you are installing an inset stove without u�lising the closed combus�on capabili�es of the Christon wood
burners, you will need to remove the Direct Air Inlet at the rear of the stove to ensure that there is sufficient
air flow to accommodate the requirements of the appliance.
DO NOT BACKFILL AROUND THIS STOVE
It could block the air intake of your appliance, preven�ng it from opera�ng as it should.