MEN MH70S, Руководство пользователя

Страница: 25 / 43

Getting Started
20MH70S00 E3

2019-10-24 Page 25
2.4.3 Mounting the MH70S in a 19" Rack
2.4.3.1 Installing Two MH70S Systems Side-by-Side in a 19" Rack
A bonding kit, which is available from MEN, is needed for installing two MH70S systems
side-by-side in a 19" rack.
The following steps are necessary:
»
Remove the mounting bracket at the right side of one MH70S and on the left side of
the other MH70S.
»
Place the front and rear bonding brackets supplied with the bonding kit as shown in
the following illustration:
»
Secure the left bonding kit bracket using the two M4x12 TX20 countersink head
screws previously removed.
See the MEN website for ordering information:
www.men.de/products/mh70s/#ord
See Chapter 2.4.2 Wall-Mounting the MH70S on page 23 .
Side panel
Front panel with
connector slots
Bonding kit
rear bracket
Bonding kit
front bracket