Memotec NetPerformer SDM-9120 Series, Руководство по установке оборудования

Страница: 86 / 161

NetPerformer Hardware Installation Guide
4-18 Memotec Inc.
4.10 Rackmount Kit
One rackmount kit is supplied with the unit for mounting in a standard 19" (48 cm) rack.
The ordering part number for the SDM-9220/9230 is
100-1086-001
, and
KT-0021088
for
the SDM-9120. To assemble the rackmount kit and install the unit in a rack, refer to
“Installing the Unit in a Rack” on page 3-21 .
For the SDM-9220/9230 units, the kit includes:
•
Two brackets (left and right)
•
Six small screws for the brackets: Phillips 5 mm (3/16”)
•
Four mounting screws with washers: Phillips 10 mm (3/8”)
4.10.1 Using the Mounting Brackets for the SDM-9120 or SDM-9140
Figure 4-9: SDM-9220/9230 Installed with Rackmount Brackets
Figure 4-10: SDM-9120 with Rackmount Brackets
Figure 4-11: SDM-9140 with Rackmount Brackets