7395784-A
memorex.com
MW212
Guía del usuario
Lea estas instrucciones de forma completa
antes de operar este producto.
memorex.com
MW212
User Guide
Please read these instructions completely
before operating this product.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING
TO QUALIFIED SERVICE PERSONNEL.
DANGEROUS VOLTAGE:
The lightning flash with arrowhead symbol within an equilateral triangle is
intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure
that may be of sufficient magnitude to constitute a risk of electric shock to persons.
ATTENTION:
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the literature accompanying
the appliance.
WARNING:
Users of this product are cautioned not to make modifications or changes that are not
approved by Imation Corp, doing so may void the compliance of this product and may result in the loss of
the user’s authority to operate the equipment.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT AND FULLY INSERT.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
This device complies with Part 15 of the FCC rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that can cause
undesired operation.
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there
is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• The rating information is located at the bottom of the apparatus.
Listen to Music
1. Turn on the MW212 by pressing the Power Button .
2. Turn on your Bluetooth enable device and place it within 30 feet (without barrier) of the speaker. If the system has recently been
connected with the mobile device, the Bluetooth Indicator LED will illuminate solidly, indicating a connection. If you have
not paired the devices, or the indicator blinks slowly, pair them as described in the
Pair a Bluetooth-Enabled Mobile Device
section above.
3. Use the connected mobile device to play and pause music. Sound will be heard through the speaker.
4. Adjust the speaker volume level either by pushing the “+” or “–” Volume Buttons on the top of the MW212, or by using
the volume controls on the mobile device.
Listen to Music Using Line-In Source
1. Press the Power Button at the top of the MW212 until the blue LED is on to turn on the MW212.
2. Insert one end of the audio cable (not included) into the Line-out (or headphone jack) on your external audio unit and the other
end into the Line-In Jack on the rear of the MW212.
3. Use the connected external audio unit to play and pause music. Sound will be heard through the speaker.
4. Adjust the speaker volume level either by pushing the “+” or “–” Volume Buttons on the top of the MW212, or by using
the volume controls on the mobile device.
Notes:
• There will be no audible tone effects when connected to a Line-in source
• Once an external audio unit is connected, its music will override music from a connected Bluetooth-enabled device.
• The MW212 will revert to the last set volume level.
• To maximize audio quality and minimize sound distortion, set your personal digital music device volume to high and use the
volume control on the MW212 speaker to adjust the listening level when connected to a Line-in source.
AUTO OFF
The MW212 will automatically shut off if there is no music from a Line-in source or from a Bluetooth-enabled device for more than
20 minutes.
MAINTAINING YOUR SYSTEM FOR CONTINUED ENjOYMENT
• When not in use, turn OFF the MW212. To extend the battery life of your external audio/mobile device, turn off the Bluetooth
signal when not in use.
• Keep the unit away from direct sunlight and excessive heat.
• Protect your furniture when placing the unit on wood and lacquered finishes.
SURGE PROTECTORS:
It is recommended to use a surge protector for AC connection. Lightning and power surges ARE NOT covered under warranty for
this product.
Imation Enterprises Corp
1 Imation Way, Oakdale, MN 55128-3414 USA
© Imation Corp
www.memorex.com
Memorex and the Memorex logo are trademarks of Imation Corp and its affiliates. The Bluetooth
®
word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Imation Corp is under license. All other trademarks are the property of their respective owners.
For additional setup, operating assistance or an electronic version of this user manual, please visit www.memorex.com
For consumer replaceable part(s), verify part number(s) then contact our parts and accessory fulfillment center at: 1-800-321-6993
ADVERTENCIA: PARA EVITAR EL RIESGO DE INCENDIO O DESCARGA, NO EXPONGA ESTA UNIDAD A LA LLUVIA O LA HUMEDAD.
Este aparato digital Clase B cumple con la norma canadiense ICES-003.
Imation Enterprises Corp
1 Imation Way, Oakdale, MN 55128-3414 USA
© Imation Corp
www.memorex.com
Memorex y el logotipo de Memorex son marcas comerciales de Imation Corp y sus afiliados. Todas las demás marcas comerciales pertenecen a sus
respectivos propietarios.
Para obtener asistencia operativa o de configuración adicional, o una versión electrónica de este manual del usuario, visite www.memorex.com
En el caso de las piezas que puede reemplazar el consumidor, verifique los números de pieza y, luego, comuníquese con el centro de distribución de piezas
y accesorios llamando al: 1-800-321-6993
PRECAUCIÓN
RIESGO DE DESCARGA ELÉCTRICA
NO ABRIR
PRECAUCIÓN:
PARA REDUCIR EL RIESGO DE DESCARGA ELÉCTRICA, NO QUITE LA CUBIERTA (NI LA PARTE TRASERA). NO CONTIENE PIEZAS EN EL
INTERIOR QUE PUEDAN SER REPARADAS POR EL USUARIO. EL MANTENIMIENTO DEBE SER REALIZADO POR PERSONAL DE MANTENIMIENTO CALIFICADO.
VOLTAjE PELIGROSO:
El rayo con el símbolo de la punta de flecha dentro de un triángulo equilátero tiene como objetivo advertir al
usuario acerca de la presencia de voltaje no aislado peligroso dentro de la caja del producto que puede ser de magnitud suficiente
para generar un riesgo de descarga eléctrica para las personas.
ATENCIÓN:
El signo de exclamación dentro de un triángulo equilátero tiene como objetivo alertar al usuario acerca de la presencia de
instrucciones de funcionamiento y mantenimiento (servicio) importantes en la bibliografía que acompaña a la aplicación.
ADVERTENCIA DE LA FCC:
Este equipo puede generar o utilizar energía de radio frecuencia. Los cambios o las modificaciones de este
equipo pueden provocar interferencia perjudicial, a menos que estén expresamente aprobadas en el manual de instrucciones. El usuario
podría perder la autoridad para hacer funcionar este equipo si realiza algún cambio o modificación no autorizados.
PRECAUCIÓN:
PARA EVITAR DESCARGAS ELÉCTRICAS, UNA LA CLAVIJA ANCHA DEL ENCHUFE CON LA RANURA ANCHA E INSÉRTELA POR COMPLETO.
LA OPERACIÓN DE ESTE EQUIPO ESTá SUJETA A LAS SIGUIENTES DOS CONDICIONES: (1) ES POSIBLE QUE ESTE EQUIPO O DISPOSITIVO NO CAUSE
INTERFERENCIA PERJUDICIAL Y (2) ESTE EQUIPO O DISPOSITIVO DEBE ACEPTAR CUALQUIER INTERFERENCIA, INCLUYENDO LA QUE PUEDA CAUSAR SU
OPERACIÓN NO DESEADA.
NOTA:
Este equipo ha sido probado y cumple con los límites correspondientes a un dispositivo digital Clase B, según la parte 15 de las Normas de FCC.
Estos límites están diseñados para proporcionar una protección razonable contra la interferencia dañina en una instalación residencial. Este equipo genera,
utiliza y puede irradiar energía de radiofrecuencia y, si no se instala y usa de acuerdo con las instrucciones, puede generar interferencia perjudicial en
las comunicaciones de radio. Sin embargo, no se garantiza que la interferencia no se produzca en una instalación en particular. Si este equipo genera
interferencia perjudicial en la recepción de radio o televisión, que puede determinarse encendiendo y apagando el equipo, se recomienda al usuario que
intente corregir la interferencia mediante una o más de las siguientes medidas:
• Vuelva a orientar o ubicar la antena receptora.
• Aumente la separación entre el equipo y el receptor.
• Conecte el equipo a un tomacorriente de un circuito distinto del que está conectado el receptor.
• Consulte con el distribuidor o con un técnico de radio o TV experimentado para obtener asistencia.
• La información de clasificación se encuentra en la parte inferior del aparato
PROTECTORES CONTRA SOBRETENSIÓN:
SE RECOMIENDA UTILIZAR UN PROTECTOR CONTRA SOBRETENSIÓN PARA LA CONExIÓN DE CA. LOS
CASOS DE SOBRETENSIÓN DE ENERGíA Y RAYOS NO ESTáN CUBIERTOS POR LA GARANTíA DE ESTE PRODUCTO.
Wireless Speaker
Universal
Let Me Unleash Your Tunes
Product Name SP
Modifier
Personality Line
1.
Read these Instructions.
2.
Keep these Instructions.
3.
Heed all Warnings.
4.
Follow all Instructions.
5.
Do not use this apparatus near water.
6.
Clean only with a dry cloth.
7.
Do not block any of the ventilation openings. Install in accordance
with the manufacturer’s instructions.
8.
Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding-type
plug. A polarized plug has two blades with one wider than the other.
A grounding-type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for your safety. When
the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly
at plugs, convenience receptacles, and the point where they exit from
the apparatus.
11.
Only use attachments/accessories specified by the manufacturer.
12.
Unplug this apparatus during lightning storms or when unused for long
periods of time.
13.
Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects have
fallen into the apparatus, the apparatus has been exposed to rain or
moisture, does not operate normally, or has been dropped.
14.
WARNING: To reduce the risk of fire or electric shock, do not expose
this apparatus to rain or moisture. Do not place objects filled with
water, such as a vase, on the apparatus.
15.
The AC mains plug is used as the power disconnect device and it
should remain readily accessible and operable during intended use. In
order to completely disconnect the apparatus from power, the mains
plug should be completely removed from the AC outlet socket.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Congratulations on your purchase of the Memorex Universal Wireless Speaker! The MW212, with built-in Bluetooth
®
wireless
technology, makes it easy to take your tunes anywhere. Its full stereo audio produces rich, balanced sound with enhanced bass for
a music experience you can hear AND feel. With easy-to-use controls and super simplified device pairing, your music is just a beat
away. Please follow these operational instructions carefully. Save them for future reference
AC CONNECTION
Insert the small end of the AC adapter in the DC IN 5V Jack located on the rear of the unit. Plug the other end into a wall outlet
having 120V AC, 60Hz.
Notes:
• Remove the DC plug and the AC-IN plug to disconnect the AC adapter when not in use.
• Only use the supplied DC 5V, 1.2A AC adapter. Other voltages could damage the product.
OPERATION
Pair a Bluetooth-Enabled Mobile Device
You can listen to your music from a Bluetooth-enabled mobile device wirelessly through this system.
Pair the mobile device as follows:
1. Turn on MW212 by pressing the Power Button .
2. Turn on your mobile device and place it within 30ft (without barrier) of the speaker.
3. Press and hold the Power Button for about 3 seconds until you hear an audible tone and the Bluetooth Indicator LED blinks
quickly. The speaker is now in pairing mode.
4. Refer to your mobile device for instruction on enabling Bluetooth. It is usually located in the Settings menu or similar location.
After enabling, “Memorex MW212” will appear as an option. Select it and your mobile device will connect with the Memorex
MW212. Use “0000” if a pairing code is necessary.
Upon successful connection a tone will be heard through the speaker and the Bluetooth Indicator LED will become solidly lit.
If pairing and thee connection fails or is not completed within 3 minutes, the speaker will exit pairing mode, indicated by a long
beep and the LED indicator will return to a slower blinking rate.
Notes:
• The Bluetooth connection will not terminate when switching between Bluetooth and Line-in sources.
• When powered ON and in Bluetooth source mode, the system will automatically try to connect to the most recently paired
device if available.
HOW TO USE THE MEMOREX MW212
6
1
3
FRONT/TOP
BACK
Front/top image and back of unit image
1. Power Button
2. Volume Down Button
3. Bluetooth Indicator LED
4. Volume Up Button
5. Line-In Jack
6. DC IN 5V Jack
(AC ADAPTER PART NO. E18-00839-01*)
* Consumer Replaceable Part (See end of guide to order.)
LOCATION OF CONTROLS
SPECIFICATIONS AND COMPATIBILITY
TROUBLESHOOTING
LED INDICATOR
Power Source (AC) .........................................5V, 1.2A adapter
Speaker.................................................................2 x 4 ohms
Output Power...............................................................2 x 2W
Weight .......................................................... approx. 1.03 lbs
Dimensions ..................... 7.56 in (L) x 2.55 in (H) x 3.60 in (W)
Compatibility .........................compatible with Bluetooth v2.0 or
above device with A2DP and AVRCP
DC in
Line-in
4
2
5
6
1
3
1. Lea estas instrucciones.
2. Conserve estas instrucciones.
3. Preste atención a todas las advertencias.
4. Siga todas las instrucciones.
5. No utilice este aparato cerca de agua.
6. Limpie sólo con un paño seco.
7. No bloquee ninguna de las aberturas de ventilación. Instale el
producto de acuerdo con las instrucciones del fabricante.
8. No instale el producto cerca de fuentes de calor, como radiadores,
rejillas de calefacción, estufas u otros aparatos (incluidos los
amplificadores) que generen calor.
9. No rechace el objetivo de seguridad del enchufe polarizado o de
conexión a tierra. Un enchufe polarizado tiene dos clavijas: una más
ancha que la otra. Un enchufe de conexión a tierra posee dos clavijas
y una tercera prolongación de conexión a tierra. La clavija ancha y
la tercera clavija se proporcionan para su seguridad. Si el enchufe
proporcionado no encaja en su tomacorriente, comuníquese con un
electricista para reemplazar el tomacorriente obsoleto.
10. Proteja el cable de alimentación de pisadas o pinchaduras, en particular
en los enchufes, los tomacorrientes y el punto de donde salen del aparato.
11. Utilice sólo dispositivos/accesorios especificados por el fabricante.
12. Desconecte el aparato durante las tormentas eléctricas o cuando no se
utilice durante un período prolongado.
13. El mantenimiento debe ser llevado a cabo por personal de
mantenimiento calificado. Se requiere mantenimiento si el aparato se
dañó de alguna forma; por ejemplo, si se derramó líquido o cayeron
objetos dentro del aparato, si se expuso a la lluvia o a la humedad, si se
cayó, si no funciona normalmente o si se dañó el cable de alimentación
o el enchufe.
14. ADVERTENCIA: Para reducir el riesgo de incendio o descarga eléctrica,
no exponga este aparato a la lluvia o a la humedad. No coloque objetos
con líquidos (p. ej., jarrones) sobre el aparato.
15. El cable de alimentación de CA es el dispositivo para desconectar la
corriente; por lo tanto, debe estar al alcance de la mano y se debe
poder manejar durante el uso previsto. Para desconectar el aparato de
la corriente, el cable de alimentación se debe quitar completamente del
tomacorriente de CA.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD
Sound not clear or no sound
Please check volume levels on MW212 and connected device
Music doesn’t transfer from external device to MW212
• Make sure your Bluetooth-enabled device has A2DP
• Select the MW212 as your speaker device
• Check if both devices are connected
• Restart MW212 and auto-connect with the Bluetooth-enabled device
LED not lit
Make sure the DC power adapter is attached to MW212
MODE
LED EFFECT
OFF .............................................................. OFF
ON (volume keys being pressed) .................... Flashing blue
Pairing ........................................................ Blinking blue
ON (Connected) ............................................ Solid Blue
ON (Pairing Fail/Disconnected) ....................... Blinking blue
Max/Min volume reached AND
Volume button still being pressed ................... Solid blue
1
1
5
3
4
4
2
2
Cofetel NotiCe:
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o dispositivo no cause interferencia
perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operación no deseada.
