SETTING THE TV/CATV BUTTON
SETTING THE CHANNELS INTO MEMORY
20
This TV is equipped with a channel memory feature which allows channels to skip up or down to the next channels set into
memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the TV’s memory. In
addition to normal VHF/UHF channels, this TV can receive up to 113 Cable TV channels.
Press the POWER button
❶
to turn on the TV. Set the
TV/CATV button
❷
to TV or CATV (see above). Antenna,
cable, satellite, etc. must be connected before memorizing
channels. Press the MENU button
❸
; the MENU screen will
appear.
1
3
2
1
Press the Navigation (
➛
) or (
❿
) button
❶
until TUNING is
selected, then scroll down using the Navigation (
❷
) button
❷
and select AUTO MEMORY.
NOTE:
You cannot access TUNING menu if in VIDEO1, 2
or 3 - see FAQ’s below.
PICTURE SOUND TIMER CUSTOM LANGUAGE TUNING
CHANNEL
TV/CABLE
ADD/ERASE
MANUAL
FINE
AUTO MEMORY
56
STD
ADD
UP
-1
MENU BAR
QUIT
MENU
EXIT
2
1
1
2
When AUTO MEMORY is in red, press the Navigation (
❿
)
button to start the Auto Search.
The TV will automatically
cycle through all the channels and store active channels
into memory. When completed, the TV will be on the first
available channel.
TUNING
CATV 23
AUTO MEMORY
STOP
AUTO MEMORY
3
Press the
Navigation (
➛
) button to stop Auto Memory while
it is searching (if desired).
4
Simply press the TV/CATV button to set the TV to TV or CATV (Cable TV) mode. To change the type of cable (STD, HRC,
IRC), simply change the TV/CATV option under the TUNING menu.
1
OPTIONS
TV:
If using a VHF/UHF antenna.
CATV:
If using Cable TV.
FAQs:
Why can’t I access TUNING?
You cannot access the TUNING option if you are in VIDEO1, VIDEO2, or VIDEO3, there is no need to.
How many channels will I actually receive?
The actual number of channels that can be received depends on how many channels your cable or satellite company, or
local area provides. Contact your company to determine the number of channels in your area.
Do channels need to be set into memory before using the CHANNEL Up + or Down – button?
Yes, the channels must be programmed into memory.
