Memmert SV 14-22, Руководство по эксплуатации

Страница: 2 / 8

page 2
General notes, safety notes, notes on electrical equipment
and electromagnetic compatibility, as well as
notes on maintenance of the unit are to be found in the
Operating Instructions for the waterbath.
Brief technical description
The shaking device permits controlled shaking of beakers or test tubes in a waterbath.
The shaking device performs a reversing linear movement with a frequency of approx. 35 to 160 strokes
per minute. The shaking speed is controlled electronically and can be adjusted in 10 speed steps. The stroke
is approx. 15 mm.
The ambient conditions for its operation are the same as for the basic units.
Inserting and removing
The bath can be operated without shaking device if required. After the shaking device and the support
basket has been removed, the side panel supplied should be secured to the gable cover by means of the
two screws in orded to ensure optimum sealing of the cover. Fitting the shaking device has to take place
in the reverse order.
Safety note
If the shaking device has to remain in a waterbath that is switched on, it has to remain switched on as
well! The shaking speed can be set to a standstill! When being switched off, the overpressure steam
blockage is out of action and condensate may pass into the housing of the shaking device!