Memjet Quadient Rena MACH 6, Руководство пользователя

Страница: 49 / 132

SECTION 3
OPERATING PRINTER
45
Touchscreen Menu Choices and Features
When you touch the “ Menu Button ” [ B ] a drop-down list of Menu choices appear with the following selections:
Job, Setup , Test Print , Maintenance , Wiper and System Test.
Touch one of these Menu selections to display the corresponding Menu Feature Buttons [ G ].
Job Menu
Tap to open the “Media Setup” Menu
Job Menu Buttons provide quick access to common functions needed when printing a Job; such as:
Test Path, Media Setup, Pause, Cancel Job, Stored Jobs
Test Path - Tap to run media through the
Printer, without printing, to check the media
feed set-up.
CAUTION! Before using this feature you
need to make sure the printer has been
properly setup to separate and feed the media
you are using.
After pressing “
Test Path ” button the printer
transport will start and media, if present, will be fed
from the feeder section into the print area and though
the system.
A “ Stop Path ” button will be displayed at this time.
Tap “ Stop Path ” to stop feeding and transport
process.
If a paper feed error occurs the “
Clear Error ”
button will appear. Remove media from the
paper path and tap Clear Error button.
Tip : You can use the “ Run Path ” feature
(Menu, Setup and Run Path) to clear media from
the printer; while in an error state. Do not use this feature if there is a physical jam. Physical jams must be
removed manually. See “
Removing Jammed Media ” for instructions.
B
G