The Memcom GSM Terminal provides the interface between the Memcom Lift Emergency telephone and the mobile
telephone network. This guide assumes that the Memcom has already been installed. The installer/customer needs to
provide a suitable SIM card to activate.
Installation
Memcom GSM Gateway
Installation Guide
The GSM terminal would normally be installed in the lift motor room or lift shaft with the Memcom on top of the lift car or
inside the car operator panel. The antenna should be mounted where a good signal can be received; this may require a
risk assessment of antenna position.
Connections GSM Gateway
12V DC Power
Memcom PSTN
Tip & Ring
Connections to Memcom
Ref No. 452 850 (GB) Version 8
