12
E. 1/4" x 1/2" Phillips Head Screw x 2
8.
6. Attach the Door Bracket to Cart Legs. Be sure the
folded strip of the bracket is closest to the Cart
Legs. Then align the holes on both ends of the
bracket with the threaded holes on the Cart Legs.
Attach the Door Bracket using 2 of the "E" 1/4"x
1/2" Phillips Head Screws. Do not tighten screws
yet. Refer to
Figure 4.
Locate the hinge holes on the Bottom Shelf and Door
Bracket. Insert the Door Hinges into these holes and
holes on Door Bracket. Push the Door Bracket down
to an even level. See
Figure 4.
Adjust bottom door
stop as necessary to insure that the Door Magnets
contact the stop and the Doors are flush with the
Bottom Shelf. Unscrew the 4 "Q" M5 x 6mm Phillips
Head Screws which were pre-assembled into the
Door Handles. Use these screws and a # 2 Phillips
Head screw driver to attach the Door Handles to
the Door Plate as shown in
Figure 4
.
Insert the 4 Side Shelf Brackets into the open slot
at the top section of each Cart Leg
.
See
Figure 4A.
Secure Brackets using 4 of the "E" 1/4"x 1/2" Phillips
Head Screws. Tighten all 4 Brackets securely.
7.
E. 1/4" x 1/2" Phillips Head Screw x 2
Q. M5 x 6mm Phillips Head Screw x 4
(found in door handles)
Figure 4
DOOR HANDLE
DOOR PLATE
SIDE SHELF
BRACKET
Figure 4A
OPEN SLOT OF
CART LEG
DOOR
BRACKET
2.
1. Place the stainless steel Side Shelf onto the Side
Shelf Brackets previously attached to the right side
of the Cart. Align the holes on the Side Shelf with
the threaded holes at the end of Shelf Brackets.
Secure firmly using 2 of the "E" 1/4"x1/2" Phillips
Head Screws. See
Figure 5.
Place the Side Burner onto the Shelf Brackets
previously attached to the left side of the Cart. Align
the holes on the Side Burner with the threaded
holes at the end of Shelf Brackets. Secure firmly
using 2 of the "E" 1/4"x1/2" Phillips Head Screws.
See
Figure 5.
E. 1/4" x 1/2" Phillips Head Screw x 2
E
.
1/4" x 1/2" Phillips Head Screw x 2
Side Shelf Assembly
Figure 5
SIDE BURNER
SIDE SHELF
BRACKET
SIDE SHELF