Member's Mark CG2036003-MM Скачать руководство пользователя страница 21

CG203600

3

-MM Eng 

                                            Page 21 of 24                                                 

20190711

 

If  using  a  Charcoal  Chimney  Starter,  follow  all  manufacturer’s  warnings  and  instructions  regarding  the  use  of  their 
product, start with 5 pounds (2.3 kg) of charcoal. When charcoal is burning strong, carefully place hot coals in center of 
each charcoal grate. 
 

 

WARNING 

 

 
DO  NOT  use  grill  without  charcoal  ash  tray  in  place.  DO  NOT  attempt  to  remove  charcoal  ash  tray  while  tray 
contains hot coals.

 

 
NOTE: to extend the life of your grill, make sure that hot coals and wood do not touch the walls of grill. 
 

IF USING CHARCOAL CHIMNEY STARTER, PROCEED TO STEP 5. 

 
If you choose to use charcoal lighting fluid, ONLY use charcoal lighting fluid approved for lighting charcoal. Do not use 
gasoline, kerosene, alcohol or other flammable materials for lighting charcoal. Follow all manufacturer’s warnings and 
instructions regarding the use of their product. Start with 5 pounds (2.3 kg) of charcoal. Place the charcoal in center of 
each charcoal grate. 
 

Step 3 

Saturate  charcoal  with  lighting  fluid.  With  lid  open  and  charcoal  grate  completely  placed  inside  the  grill,  wait  2  to  3 
minutes to allow lighting fluid to soak into charcoal. Store charcoal lighting fluid a safe distance from the grill. 
 

Step 4 

With  grill  lid  open,  stand  back  and  carefully  light  charcoal  and  allow  to  burn  until  covered  with  a  light  ash 
(approximately 20 minutes). 
 
 

 

WARNING 

 

 
Charcoal lighting fluid must be allowed to completely burn off prior to closing grill lid (approximately 20 
minutes).Failure to do this could trap fumes from charcoal lighting fluid in grill and may result in a flash-fire or 
explosion when lid is opened. 

 

Step 5 

Place cooking grids on grill support lips.   

 

 

WARNING 

 

 
Always wear oven mitts/gloves when adjusting cooking levels to protect your hands from burns. 

 
Step 6 

Place food on cooking grids and close grill lid. Always use a meat thermometer to ensure food is fully cooked before 
removing from grill. 
 

Step 7 

Allow grill to cool completely, and then follow instructions in the “After-Use Safety” and “Proper Care & Maintenance” 
sections of this manual. 

 
 

Содержание CG2036003-MM

























Отзывы: