Member's Mark 730-0582, Инструкции по сборке и эксплуатации, Страница: 19 / 36

19
Light Operation Instruction
Make sure light’s power switch on the control panel is in the “OFF” position.
Connect power plug to properly grounded outlet.
Turn the light’s power switch to “ON”.
WARNING
Keep any electrical supply cord away from any heated surface.
Bulb Replacement
1. Make sure the light’s power switch on the
control panel is in the “OFF” position and power
plug is disconnected from outlet.
2. Use a screwdriver to loosen the screw securing
the light.
3. Take out the light
4. Remove the glass cover from the
light compartment.
5.Use a screwdriver to loosen the two screws
locking the bulb. Pull out the light bulb
and replace with a new bulb.
6. Reverse the instruction from steps 5-1 for
installation.
Cleaning Method
Follow steps 1-4 above for glass cover removal. Use a damp towel to clean the surface of glass cover.
Make sure the glass cover is completely dry before re-installing.
WARNING
Make sure the light switch is on “OFF” position and power plug is disconnected from power outlet prior
to cleaning the glass cover.
WARNING
The light glass cover should not be in contact with water or any other liquid when it’s warm. Sudden
change of temperature may cause cracks on glass cover.
Bulb Specification
Bulb Type: Halogen
Wattage: 10 watts per bulb
Voltage: 12 volts
Please contact customer service at
1-800-790-1299
for assistance on bulb replacement information.
WARNING
To ensure continued protection against electric shock:
Connect to properly grounded outlets only.
Do not expose to rain.
Keep extension cord connections dry and off the ground.
Grill light