73015
Advanced One-Zone Electronic Water Timer
User Instructions
n
English
73015_INS_ENG_00
OK
ON
/OFF
MA
NUAL
CYC
LE
A B
C D
CYCLE
HRS
DAY
MIN
RESET
MANUAL
AM
PM
TODAY
TIME
WATER
EVERY
SU
FR SA
TH
WE
TU
MO
A B C D
DAY
NEXT START
DELAY
CODE:
WATER DAY
START WATER
OFF
HOW
LO
NG
AU
TO
SET CL
OCK
RAIN DELAY, HOLD
Manual Watering Button
Cycle Button
Battery Indicator
Toggle Button
+/- Buttons
OK Button
OK
ON
/OFF
MA
NUAL CY
CL
E
A B
C D
CYCLE
HRS
DAY
MIN
RESET
MANUAL
AM
PM
TODAY
TIME
WATER
EVERY
SU
FR SA
TH
WE
TU
MO
A B C D
DAY
NEXT START
DELAY
CODE:
WATER DAY
START WATER
OFF
HOW
LO
NG
AU
TO
SET CL
OCK
RAIN DELAY, HOLD
1
Battery Installation & Assembly
■
n
Remove the battery holder from the back of the
Timer
Control Unit
. Insert two AA alkaline batteries (Do not
use rechargeable batteries) as indicated on the battery
holder. Replace the battery holder, making sure that it is
firmly and securely placed in the
Timer Control Unit
.
■
n
NOTE:
Do not use your timer when the air temperature
is below 40°F (4.5° C). When storing your timer, be sure
it is in a dry place and protected from frost.
Installation of the Timer
■
n
Attach the timer to an outside faucet and turn on the water. The water must be left on while the
timer is attached to the faucet for your timer to operate.
■
n
NOTE:
You may choose to program your timer before or after attaching it to the faucet.
2
SET CLOCK:
“Set Current Time and Day”
■
n
The Water Timer default setting is a
12-hour
mode (AM/PM). To ensure correct timing,
look for either
AM
or
PM
to the left of the time. To switch between
12-hour
(AM/PM) and
24-hour
(military time), hold the
button for 5 seconds.
12-hour
mode shows AM or PM
while
24-hour
mode does not.
Note:
Changing time mode will erase all programs.
■
n
Before setting your watering times, you must first set the current time and day of the week.
When the batteries are first installed, the arrow in the screen will point to
CLOCK
. If it is not in
that position, press the
button until the arrow is pointing to
CLOCK
.
■
n
On your screen, a flashing box will appear around the
SU
. Simply set the timer to the current
day by pressing the and buttons on the touchpad
until the square is on the correct day. Once the correct
day has been indicated, press the
button.
■
n
To set the time, press the and buttons until the
correct time appears on the screen, and then press
.
■
n
Press the
button (at the top of the touch pad) to
move to
WATER DAY
.
3
WATER DAY:
“What days do you want to water?”
■
n
Check to be sure that the arrow on the screen is pointing to
WATER DAY
. With this setting, you
can select specific days to water or an interval period of the day when watering will occur.
■
n
To set the watering day, use the and buttons to select the day-of-the-week you wish to
water. Press the
button when the desired day-of-the-week is highlighted on the screen. You
can select as many days as you like. The days selected will have a square around them.
■
n
To water at preset intervals, press the button on the buttonpad to navigate past the days of
the week. Press the and buttons to set the time period (
EVERY 1 DAY
through
EVERY
7 DAY
(s) ).
■
n
Press the
button to move to
START WATER
.
4
START WATER:
“What time-of-day do you want to water?”
■
n
You can select up to four independant start times
(CYCLE A, B, C, D)
. With the arrow pointing
to
Start Water
on your screen,
CYCLE A
should be highlighted, use the and buttons to
select the first watering time.
■
n
If you want to set another
START WATER
time, press
to move to
CYCLE B
. Repeat the
process above to set the next
START WATER
time. You may select up to four
START WATER
times.
■
n
When you have set all desired
START WATER
times, press
the
button to move to
HOW LONG
.
5
HOW LONG:
“Set the length of each watering cycle.”
■
n
With the arrow pointing to
HOW LONG
, use the and buttons to select the length of each
watering cycle. After setting HOW LONG you want to water during a selected cycle, press
to move to the next cycle. Repeat until
HOW LONG
has been set for each cycle.
■
n
HOW LONG
can be set for up to 360 minutes (6 hours) for each watering cycle. The Cycle
length cannot overlap the next
START WATER
time.
■
n
Note:
You can only select Watering Cycles if you have set a start time in
Step 4
above.
■
n
When you have set all desired
START WATER
times, press the
button to
enter
AUTO
Mode.
6
AUTO MODE:
“Your timer is ready to go.”
■
n
In
AUTO
Mode, your timer will run the watering program you have entered.
■
n
The screen display will alternate between showing the Current Time and the
Next Watering Cycle.
We recommend replacing batteries when the indicator reaches
CYCLE
HRS
DAY
MIN
RESET
MANUAL
AM
PM
TODAY
TIME
WATER
EVERY
SU
FR SA
TH
WE
TU
MO
A B C D
DAY
NEXT START
DELAY
CODE:
WATER DAY
START WATER
OFF
HOW L
ONG
AU
TO
CL
OCK
RAIN DELAY, HOLD
CYCLE
HRS
DAY
MIN
RESET
MANUAL
WATER
SU
FR SA
TH
WE
TU
MO
A B C D
DAY
NEXT START
DELAY
CODE:
WATER DAY
START WATER
OFF
HOW L
ONG
AU
TO
CL
OCK
RAIN DELAY, HOLD
CYCLE
HRS
DAY
MIN
RESET
MANUAL
AM
PM
TODAY
TIME
WATER
EVERY
SU
FR SA
TH
WE
TU
MO
A B C D
DAY
NEXT
START
DELAY
CODE:
WATER DAY
START WATER
OFF
HO
W L
ONG
AU
TO
SE
T CL
OCK
RAIN DELAY, HOLD
WATER DAY
START WATER
OFF
HO
W L
ONG
AU
TO
SE
T CL
OCK
RAIN DELAY, HOLD
CYCLE
HRS
DAY
MIN
RESET
MANUAL
AM
PM
TODAY
TIME
WATER
EVERY
SU
FR SA
TH
WE
TU
MO
A B C D
DAY
NEXT START
DELAY
CODE:
Hold the or buttons to advance settings more quickly.
