BEFORE FIRST USE
•Remove all packaging materials.
•Then boil clean cold water three times. (See OPERA-
TION) pour the water away each time.
OPERATION
•Open the lid and fill the kettle with the required amount
of water. Please observe the water level marks on the
outside of the kettle. Do not fill below the “Min” mark
and above“Max” mark.
•Close the lid.
Press the switch to switch the kettle on and the indicator
light will turn on. (If the indicator light is on, that means
the kettle is operating, don’t press the switch again.)
•You can pour the water out without opening the lid.
*If you want to stop the water boiling or interrupt it
briefly, remove the kettle from the base.
•Note: This appliance comes with a safety device,
which automatically switches off the heater element if
the appliance is inadvertently switched when empty, or
if it boils dry. In this case, let the appliance cool down
completely, before filling with water again.
CLEANING
•Please also observe the safety advice for this.
•Always remove the plug from the mains socket before
cleaning the base. Let the kettle cool down completely.
•Dry the kettle before plugging into the mains again.
Clean the outside of the kettle and the base with a soft
damp cloth, do not use scouring materials.
•Descale the appliance regularly. Use detergent, which
can be obtained from specialist shops, and follow the
instructions given.
•To store the kettle; wind the cord in the cord compart-
ment on the underside of the base.
Technology data:
Voltage: 230V
Wattage: 2000W
MW_EX22350_SSKETTLE_IM.indd 4
MW_EX22350_SSKETTLE_IM.indd 4
10/12/2009 8:33:43 AM
10/12/2009 8:33:43 AM