Mellanox Technologies MTS3610D-6UNC, Руководство пользователя

Страница: 24 / 73

Installation Rev 1.7
Mellanox Technologies 24
Figure 13: Rail Slide Installation
4. Insert four caged nuts into the rack on the side you plan to have the powers supplies and spines.
Use the same U number on this side of the rack as you used on the rail side of the rack.
5. Prepare four bolts and keep them within reach.
6. Slide the shelf onto the rail slides.
7. Connect the shelf to the rack.
Figure 14: Shelf Installation
8. Tighten all eight bolts into the caged nuts.
3.2.2.2 Inserting the Chassis
1. Screw the four Eye bolts to the four corners of the top of the chassis.
2. Connect the eye bolts to a Mechanical lifting device.
Figure 15: Mechanical Lifting Device
3. Raise the chassis 2 cm (1”) above the level of the shelf.
The caged nuts
are separated by
a single space