Driver Software and Firmware
Rev 1.9
Mellanox Technologies
26
Figure 7: Support Download Assistant
3. If a newer firmware version exists for your Mezzanine card, update the firmware as follows:
a. Download the firmware image zip file from the Download Center (see Step 2a above).
e. Unzip the firmware image.
f. Burn the firmware image. Enter:
g. Reboot the computer.
h. Enter: mst start.
i. Verify that the card firmware was updated successfully.
> flint -d /dev/mst/mt4099_pci_cr0 -i <binary image> burn
> flint -d /dev/mst/mt4099_pci_cr0 q
Image type: ConnectX
FW Version: 2.9.4100
Device ID: 4099
...