Mellanox Technologies 1GK7G, Руководство пользователя

Страница: 59 / 64

59
Mellanox Technologies Confidential Rev 1.1
7 Specifications
7.1 Y1T43 and 7TKND Specifications
Please make sure to install the ConnectX-6 card in a PCIe slot that is capable of
supplying the required power and airflow as stated in the below table.
Physical
Adapter Card Size : 6.6 in. x 2.71 in. (167.65mm x 68.90mm)
Connector : Single QSFP56 InfiniBand and Ethernet (copper and optical)
Protocol Support
InfiniBand : IBTA v1.3 and v1.4
a
Auto-Negotiation: 1X/2X/4X SDR (2.5Gb/s per lane), DDR (5Gb/s per lane), QDR
(10Gb/s per lane), FDR (14.0625Gb/s per lane), EDR (25Gb/s per lane) port,
HDR100 (2 lane x 50Gb/s per lane) port
Ethernet : 100GBASE-CR4, 100GBASE-KR4, 100GBASE-SR4, 50GBASE-R2,
50GBASE-R4, 40GBASE-CR4, 40GBASE-KR4, 40GBASE-SR4, 40GBASE-LR4,
40GBASE-ER4, 40GBASE-R2, 25GBASE-R, 20GBASE-KR2, 10GBASE-LR,10GBASE-
ER, 10GBASE-CX4, 10GBASE-KX4, 10GBASE-CR, 10GBASE-KR, SGMII, 1000BASE-
CX, 1000BASE-KX, 10GBASE-SR
Data Rate
InfiniBand SDR/DDR/QDR/FDR/EDR/HDR100
Ethernet 1/10/25/40/50/100 Gb/s
Gen3.0/4.0 : SERDES @ 8.0GT/s/16GT/s, x16 lanes, SNAPI (Single-slot) PCIe 2x8
in a row (2.0 and 1.1 compatible)
Adapter Card Power
Voltage : 12V, 3.3VAUX
Power Cable Type
Typical Power
b
Passive Cables 19.4W
Maximum
Power
Passive Cables 22.4W
3.5 Active Cables 22.4W
Maximum power available through QSFP56 port : 3.5W
Environmental
Temperature
Operational 0°C to 55°C
Non-operational -40°C to 70°C
Humidity : 90% relative humidity
c
Airflow (LFM) /
Ambient
Temperature
Cable Type
Airflow Direction
Heatsink to Port Port to Heatsink
Passive Cables 300 / 55°C 200 / 35°C
Mellanox Active 2.75W
Cables
300 / 55°C 200 / 35°C
Regulatory
Safety : CB / cTUVus / CE
EMC : CE / FCC / VCCI / ICES / RCM / KC
RoHS : RoHS Compliant
Notes : a. The ConnectX-6 adapters supplement the IBTA auto-negotiation specification to get better bit error rates and longer cable reaches. This supplemental
feature only initiates when connected to another Mellanox InfiniBand product.
b. Typical power for ATIS traffic load.
c. For both operational and non-operational states.