4. Turn the mixer flange (5) clockwise until the arrow is
pointing to the "closed lock" symbol.
5. Fit the tube (6) fully onto the nozzle of the mixer unit
and the beverage outlet.
͵
Check that the tube is fitted securely.
6. Fit the powder chute (2) so that it is pointing upwards.
͵
Do not reach into the cleaned powder chute with
your fingers.
7. Fit the instant container (1) onto the machine.
8. Turn the powder chute downwards to direct it into
the mixer housing.
9. Repeat stages 6 to 8 for the second instant container
if necessary.
9
The mixer unit has been installed.
8�9
Cleaning the bean container
There will be one or two bean containers depending on
the equipment.
000260
1
2
Fig. 56: Removing the bean container
1. Remove the lid on the bean container.
2. Turn the lever (1) a ¾ turn counterclockwise.
3. Remove the bean container (2).
4. Empty the bean container.
5. Clean all parts thoroughly with hot water and a
detergent.
͵
Dishwasher cleaning is possible at max. 60 °C.
6. Dry the parts completely.
7. If you want to continue using the machine, refill the
beans as described in chapter 5.3.1 on page 12.
9
The bean container has been cleaned.
8�10
Cleaning the instant container
000261
1
2
Fig. 57: Opening the instant container cover
1. Open the machine door using the key (2).
2. Lift the instant container cover (1) upwards carefully.
There will be one or two instant containers depending on
the equipment.
000242
1
2
Fig. 58: Instant container
3. Turn the powder chute (2) upwards so that no
powder can fall out.
4. Remove the instant container (1).
5. Empty the instant container.
6. Clean all parts thoroughly with hot water and a
detergent.
͵
Dishwasher cleaning is possible at max. 60 °C.
7. Dry the parts completely.
͵
To prevent the instant powder from forming
clumps, the parts must be absolutely dry.
8. If you want to continue using the machine, refill
the instant powder as described in chapter 5.3.2 on
9
The instant container has been cleaned.
Cleaning
37
28514 • 20170301
8
