Melitta Cafina XT8-F, Руководство по эксплуатации, Страница: 22 / 36

000162
Name selection
Cancel OK
Group name Group name
Language selection
Name line 1
Category models Category models
Name line 2
Milk
Hot water
Speciality
Milk
Hot water
Speciality
4
3
2
1
Fig. 27: Selecting or entering a name
4. Under “Language selection” (4), select the language
that should be used for the name.
͵
You can adjust the languages available for se-
lection under the machine settings (see chap-
ter 7.7.3 on page 28).
5. Select one of the following options to enter a name
for the line in question:
•
Select a default name: Under “Category
models” (2), select a category and then select a
name from the list below (1).
•
Enter your own name: Press the corresponding
line (3) and enter a name using the screen
keyboard (see chapter 7.2 on page 21).
6. Confirm the name with the “OK” button.
7. Press the “Release” button (3) (see Fig. 26) to activate
the created group for dispensing.
͵
If you do not release the group, it will not be dis-
played on the dispensing interface.
9
The new product group has been created.
7�4�3 Adding dispensing products
Self-service and waiter operation
1. If you wish to add a dispensing product to a product
group, open the required product group by pressing
the symbol twice.
2. Tap a free dispensing position.
3. Press the “Create new product” button (5) (see Fig.
26).
4. Select the required dispensing product from the
product list.
5. Press the “Release” button (3) (see Fig. 26) to activate
the created product for dispensing.
͵ If you do not release the product, it will not be
displayed on the dispensing interface.
9
The dispensing product has been added.
Quick start buttons
1. Tap a free dispensing position.
2. Open the dispensing position by tapping it again.
3. Select the required dispensing product from the
product list.
͵
Products to be displayed in this list must be set up
accordingly by customer service.
9
The dispensing product has been added.
7�4�4 Sorting the dispensing view
1. Press the required product group or product button.
2. Press the “Down” button (6) (see Fig. 26) to move the
product group or product button downward.
3. Sort the dispensing view.
͵
Start with the last product group or product but-
ton at the bottom and end with the first product
group or product button at the top.
9
The dispensing view has been sorted.
Settings
22
32743 • 20190801
7