The field next to the symbols determines the base setting
of the parameter, for example, for “switching on/off”, if
the base setting of the machine is principally “on” and
switch-off times are specified, or “off” and switch-on
times are specified.
2. Press a row (5) to view the events set for the
parameter in question.
͵
The check mark at the bottom right closes the dis-
play of the events for the corresponding param-
eter.
3. Press a weekday (6) to display the selected weekday
in 24 hours.
͵
When pressing a time of day, you can zoom in on
the timeline further.
͵
With the buttons “<” and “>” you can scroll the
timeline.
͵
Press the title (4) to return to the previous display.
9
The weekly planner has been viewed.
5�7
Unlocking and locking the coffee urn
You can unlock or lock the lid of the coffee urn.
000332
1
3
2
Fig. 11: Unlocking and locking the coffee urn
4. Open the machine door (3) using the key (1).
5. Select one of the following options:
•
Unlocking the coffee urn: Slide the lock of the
coffee urn (2) to the left as far as it will go.
•
Locking the coffee urn: Slide the lock of the coffee
urn to the right as far as it will go.
6. Close the machine door.
9
The lid of the coffee urn is unlocked or locked.
5�8
Locking product dispensing
You can lock product dispensing temporarily.
1. Hold the manager chip key on the contact area on
the front of the machine (see chapter 5.1.4 on
2. On the display, press the “Unit” button.
3. On the display, press the “Lock product choice”
button.
9
Product dispensing has been locked.
To activate product dispensing again, hold one of the chip
keys on the contact surface on the front of the machine
(see chapter 5.1.4 on page 9).
5�9
System messages
5�9�1
Messages in self-service operation
In self-service operation, system messages are indicated
by a notice symbol.
000413
Coffee to go
Coffee with milk
Coffee
1
Fig. 12: System messages
You can view the system messages by pressing the
symbol (1).
5�9�2
Messages in waiter operation
In waiter operation, system messages are displayed, for
example, if a product material has run out (e.g., “Coffee
granule container empty”), directly on the display.
A notice symbol to the right of the lower bar will then
refer you to any system messages that have not been
rectified. You can view the system messages by pressing
the symbol.
Operation
15
32743 • 20190801
5