background image

5

Thank you for choosing MELICONI.

This simplified universal remote control contains all the main functions of most TV and digital

terrestrial and/or satellite decoder (STB) remote controls.

Before programming and using the remote control, fit the batteries.

Keep your Instructions and Code Booklet for future reference.

USING THE KEYS AND FUNCTIONS

FITTING THE BATTERIES

GB

SET-UP

Read these instructions carefully before programming your remote control!

To command your appliances, you must program your 

Speedy 210 STB

as described in 

paragraphs  

A

or  

B

below.

Visit out Internet site www.meliconi.com for interactive instructions for easy and fast remote

control programming. Warning: programme one appliance at a time.

Before programming and using the remote control, fit the batteries.

The remote control requires 2 new AAA/LR03 alkaline batteries. Insert the batteries as shown.

• The batteries must be changed once a year.
• Change the batteries if the light indicator starts to flash during use.

The batteries are low.

• This remote control has a permanent memory and does not lose the

programmed codes when the batteries are removed.

• Make a note of the code for your TV on the adhesive label supplied

inside the battery cover. This note will be handy if you have to
reprogram your remote control.

ON/OFF key to turn the appliance off, 

or in some cases on.

Control the volume using

+

.

To select an external input terminal. 

To select the next program or
to turn ON your TV.

Mute key.

Control the volume using

-

.

Teletext keys: 

to access Teletext 
close Teletext and return to

normal viewing 

Numeric keypad.

Light indicator.

Selection key to control the decoder.

To select the previous program or

to turn ON your TV.

Selection key to control the TV.

istr. SPEEDY 210 SB-17 lin  12-12-2007  15:51  Pagina 5

Содержание SPEEDY 210 STB

Страница 1: ...remote control requires 2 new AAA LR03 alkaline batteries Insert the batteries as shown The batteries must be changed once a year Change the batteries if the light indicator starts to flash during use The batteries are low This remote control has a permanent memory and does not lose the programmed codes when the batteries are removed Make a note of the code for your TV on the adhesive label suppli...

Страница 2: ...n this case repeat the search procedure from point 3 HOW TO PROGRAMME THE REMOTE CONTROL A NOTE during the search operation the light indicator flashes more quickly The light indicator stops flashing and the remote control leaves the programming mode in the following cases if no keys are pressed for 12 seconds if the code search list is completed In this case switch to programming mode B This oper...

Страница 3: ...eys enter the code number you noted down previously Three flashes indicate that the code has been saved correctly If not try the code entry procedure again from point 1 PROGRAMMED CODE NOTING 1 Hold the selection key whose code you are looking for down for five seconds until the light indicator at the top starts flashing to indicate that the remote control is programming 2 Release the selection ke...

Страница 4: ...ontrol is pointing at the appliance without any obstacles in the way If required reset the remote control code following the programming procedure A or B The batteries are low Change them You may have used the wrong code Reset the remote control code following the programming procedure A or B Set the remote control code following the global search programming procedure B WARRANTY 2 years The warra...

Отзывы: