Melexis PTC-04, Руководство пользователя

Страница: 4 / 17

Calibration Software PTC04
User Manual
Page 4 of 17
REVISION 1.44.01 - 2 MAY 2018
UI_0PTC04AAMLX
RS232 settings
The RS232 communication of the multimeter has to be configured as follows:
Keithley 2000 multimeter Agilent (HP) 34401A multimeter
BAUD: 19.2 K BAUD: 9600 BAUD: 4800
FLOW: NONE PARITY: EVEN: 7BITS OR PARITY: NONE: 8BITS
TX TERM: CR LANGUAGE: SCPI LANGUAGE: SCPI
For configuration instructions, please consult the user’s manual of your multimeter.
All other settings are set by the software via RS232 commands.
Check Calibration of the programmer
Now your PTC programmer is connected and you can start-up the MPT software .
When the software is started, double click on PTC-04 in the UI modules list
or select from the menu “Tools

Search devices

All ”
Figure 4: Melexis Programmable Toolbox.