Melexis PTC-04, Руководство пользователя

Страница: 16 / 17

Calibration Software PTC04
User Manual
Page 16 of 17
REVISION 1.44.01 - 2 MAY 2018
UI_0PTC04AAMLX
What do we calibrate?
Sensing lines:
There are four sensing lines with independent ground connection.
The source and reference that are used to calibrate the sensing lines are PPS 1 and the external voltmeter.
Sensing line 1 channel 12 and Channel 28 (High sensitivity) of the ADC ;
Sensing line 2 channel 13 and Channel 29 (High sensitivity) of the ADC ;
Sensing line 3 channel 14 and Channel 30 (High sensitivity) of the ADC ;
Sensing line 4 channel 15 and Channel 31 (High sensitivity) of the ADC .
PPS1:
For each PPS, the software checks the ADC first then the DAC and then the additional channels that are connected to that
source.
Voltmeter on the PPS1 channel 0 and Channel 16 (High sensitivity) of the ADC ;
PPS1 channel 0 of the DAC ;
Current meter on the PPS1 channel 1 of the ADC ;
PPS 5: IDD limiter PPS1 channel 4 of the DAC .
PPS2:
Voltmeter on the PPS2 channel 2 and Channel 18 (High sensitivity) of the ADC ;
PPS2 channel 1 of the DAC ;
Current meter on the PPS2 channel 3 of the ADC ;
PPS 6: IDD limiter PPS2 channel 5 of the DAC .
PPS3:
Voltmeter on the PPS3 channel 4 and Channel 20 (High sensitivity) of the ADC ;
PPS3 channel 2 of the DAC ;
Current meter on the PPS3 channel 5 of the ADC ;
PPS7: IDD limiter PPS3 channel 6 of the DAC .
PPS4:
Voltmeter on the PPS4 channel 6 and Channel 22 (High sensitivity) of the ADC ;
PPS4 channel 3 of the DAC ;
Current meter on the PPS4 channel 7 of the ADC ;
PPS8: IDD limiter PPS4 channel 7 of the DAC .