DVK90132
MLX90132 Development kit
390129013201
Page 10 of 18
Development kit
Rev 002
May-2012
4.2 Development mode
The development mode allows controlling the MLX90132 through available TCL scripts. This mode requires an
USB connection between the microcontroller board and the computer and the installation of TCL software.
Once the Development mode is selected, the USB connection will be automatically established with the user
computer and the following picture will be displayed on the LCD screen.
Figure 8: development mode selected, USB communication successfully established
Note:
The USB drivers are automatically installed and recognized by the operating system when connected to
the user computer, there is no need of specific driver installing.
4.2.1 TCL script examples
Once the DVK90132 is connected to the user computer, it can be controlled through TCL scripts, to open the
script provided with the kit please follow the procedure describes below:
•
Open the ezdit editor
•
Go to “Project” -> “Open project”
•
Select the folder “DVK90132” provided in “DVK90132_TCL_Scripts” folder on the computer
•
All the scripts will appear in the window of Ezdit, simply double click on the script to open it.
The following chapters show some examples of TCL scripts provided with the DVK90132:
Figure 9: Script examples provided with the DVK90132
