manualshive.com logo in svg

Meler Micron + 10, Инструкция по эксплуатации, Страница: 21 / 120

Поделиться
Скачать
Meler Micron + 10 Скачать руководство пользователя страница 21

MA-5162-ENG  

 PISTON ADHESIVE MELTER

INTRODUCTION

2-7

 range option accessories

If some of the different machine configuration options have been chosen, it 

will be necessary the following accessories:

3x400 & 3x480 whitout neutral power supply voltage option

The transformer for the 5, 10 and 20l machine will be included.

Automatic feeder option

The automatic adhesive feeder will be included and is the same for the 5, 10, 

20 and 35l machines. 

Suction lance and hose have to be order separately

.

Warning light option

The warning light must be requested separately. There is a choice of the low 

level and colourless (white) indicator light or the low level and temperature OK 

indicator light (green). They are both the same for all machines.

VP option

The VP proportional valve system must be requested separately. It is the same 

for all machines in all cases.

Incompatibilities

•  230ºC & Float sensor
•  Micron 35 & 7cc/stroke piston pump
•  Micron 35 &  3~400V 50/60Hz + PE
•  Micron 35 &  3~480V 50/60Hz + PE
•  Automatic feeder & Float sensor
•  Automatic feeder & Capacitive sensor
•  Automatic feeder & Tower light
•  Float sensor & Capacitive sensor

•  Bluetooth & Wifi 
•  UL & prepared for external melter controller
•  UL & HB01
•  UL & 230 ºC
•  UL & integrated Starbi
•  UL & Bluetooth
•  UL & Flowmeter
•  UL & 400
•  CE & 480
•  6 electrical outputs & integrated Starbi

Содержание Micron + 10

























































































































Отзывы:

Нет отзывов