RF wireless LED remote controller
Four zones/areas
Press-button RGB+W controller
ML-2819S
Parameter
Wiring diagram
Product Size
Brief introduction of buttons
Product
introduction
The ML-2819S RGBW remote controller features 4 different zones and 2 quick brightness control buttons.It can
save up to 3 colours or 3 modes into the corresponding buttons (S1, S2, S3) for each zone. The colour can be
easily selected through the Colour Wheel, designed for easy finger control.
Additional option to set the system as RGB 3-channel or RGBW 4-channel output.
Remote
Part No.
Operation Voltage
DIMENSIONS
ø/h (mm)
Operation
Frequency
ML-2819S
4.5VDC
48x140x16
434MHz
Remarks
3 AAA (1.5V) batteries
Indicator: indicate the state of
remote control
White channel: the 4th channel
ON/OFF of all zones
4 zones: each zone can save
3 color or modes
Brightness: dim up
Brightness: dim down
S1
S2
S3
W
W+
Running button/Speed button
ww nw and cw mixed by RGB
Save button
Color wheel
55.0
17.0
120.0
Part No.
Input Voltage
Remarks
Current
ML-1009FAWi
12-36VDC
Constant voltage
4x(60-180)W
4x5A
Output
Receiver(purchased separately)
Operation
Learning (matching)
a. Do wiring according to connection diagram
b. Wake up the remote control by touching ON/OFF button.
c. Press learning button on receiver.
d. Touch any zone button on remote control.
e. Then touch color wheel.
f. Connected LED light will blink to confirm zone designation.
Choose zone number , for example, and , then touch , choose the color you want,
zone 1 and 3 will indicate corresponding color as we touched.
Color wheel
12V/24V/36V
Power Supply
Constant Voltage
RGBW LED Strip
1
2
-3
6
V
D
C
w
h
it
e
1
2
3
4
w
w
c
w
w
w
c
w
RF & WiFi Receiver
ML-1009FAWi
Brightness Up & Down Button
Short/Long press button
to dim down brightness of RGB channels, Short/long press
button to dim
up RGB channels.
“W” channel is separated from RGB channels, so we can only long press button to dimming“W” channel.
Running Mode & Speed Button
a. Short press
,
mode will run. Press it once, it runs one mode. Press button again, it stops, then press
one more time, it will enter next mode. There are total 10 build-in modes.
b. Long press
when mode is running, Fist long press will speed up the color moving, long press again to
speed down the color moving.
5
ISO9001
：
2008
