Page 22
6.3.3
Printing out stored records
When an external printer is fully installed, a print-out of selected records from the memory can be produced by
selecting the following options after switching on the autoclave:
Operation
Display message
1. Hold down "+" button
and also press "-"
button.
Select "Function"
menu,
submenu "Print"
2. Press
"Program"
button,
Select "Print" menu,
submenu "File
transmission"
3. Press "+" (or "-" ) until
the submenu "Print last
cycle" appears on the
display
4. Press
"Program"
button, the cycle record
number flashes
5. To select another
number, press the "-" or
"+" button until the right
number is reached, e.g.
here No. 25
6. Press "Program" button
to start the print-out of
the selected record,
(or to terminate press
"Start-Stop" and return
to the "Function" menu)
7. If you wish to print
further records then
return to Point 4, or...
8. ... to terminate press
"Start-Stop" and return
to the "Function" menu
9. Press the "Start-Stop"
button to return to the
initial display
Program Start-Stop
F u n c t i o n :
P r i n t
Program Start-Stop
F u n c t i o n :
P r i n t
Program Start-Stop
1 4 : 2 7 : 3 0
0 . 0 2 b a r 2 5 ° C
Program Start-Stop
P r i n t
F i l e t r a n s m i s s i o n
Program Start-Stop
L a s t c y c l e :
P r i n t N o . 4 0
Program Start-Stop
L a s t c y c l e
P r i n t N o . 4 0
Program Start-Stop
P r i n t
Program Start-Stop
L a s t c y c l e :
P r i n t N o . 4 0
Program Start-Stop
P r i n t c y c l e
N o . 2 5
