MELAG Sterilisator 205, Руководство пользователя

Страница: 12 / 22

5 First steps
12
Opening and closing the door
CAUTION
Danger of burns from hot metal surfaces
n
Allow the device to cool sufficiently before opening.
n
Do not touch any hot metal parts.
PLEASE NOTE
The device must always be deactivated before it is opened.
Do not add any objects or open the door after the sterilization procedure has started; this
could result in cooling and the objects not being sterilized for a sufficient time.
1. Move the On/Off switch to the “0” position to switch off.
2. Move the door forwards to open.
3. Move the door backwards to close.
Replacing the mount
CAUTION
The mounts can have sharp edges.
n Wear suitable protective gloves.
The mounts are installed to the left and the right in the sterilization chamber and can be replaced as
follows:
1. Slide the mount upwards from below and pull off to the side.
2. Set the mount with the screws into the larger aperture and press the mount downwards.