MEITRACK T633G User Guide
Copyright © 2019 Meitrack Group All rights reserved. - 13 -
Track by time interval or distance.
Query historical trips.
Set polygonal geo-fences.
Bind driver and vehicle information.
View various reports.
Send commands in batches.
Support OTA updates.
For details, see the
MEITRACK GPS Tracking System MS03 User Guide
.
8
Installing the T633G
8.1
Installing GPS and 3G Antennas
Connect the 3G antenna to the connector which is labeled "GSM". The 3G antenna is non-directional, so you can hide
it in any place of a vehicle.
Connect the GPS antenna to the connector which is labeled "GPS". It is recommended that the antenna is facing up
to the sky and the antenna side with words is downwards. Secure the antenna by using double sided tapes.
Note: Do not install the GPS antenna at a metal covered place.
8.2
Installing an I/O Cable
The I/O cable is a 12-pin cable, including the power, analog input, digital temperature sensor input, and
negative/positive input and output interfaces.
1
Power (+)
3
Input 1
5
Input 2
7
Input 3
9
Fuel level sensor
11
Output 2
2
GND (-)
4
GND (-)
6
Output 3
8
AD input 1
10
Output 1
12
Digital temperature sensor
Pin Number (Cable Name)
Optional
Color
1 (Power cable)
Red
2 (GND)
Black
3 (SOS)
White
4 (GND)
Black
5 (IN2)
AD3/OUT5
White & brown
6 (OUT3)
IN6
Yellow & red
7 (IN3)
AD6/OUT6
White & red
8 (AD1)
IN4/OUT7
Blue
9 (AD2)
IN5/OUT8
Blue & brown
10 (OUT1)
IN7
Yellow
11 (OUT2)
IN8
Yellow & brown
12 (SEN)
IN9/OUT4
Green
Pin Number
Color
Description
