ETN-M100-Zone-Rev1-letter.doc
Rev. 1
15/03/07 1
Meitav-tec Ltd (Contel group)
Tel: +972-3-9626462 Fax: +972-3-9626620
www.meitavtec.com - [email protected]
ETN-M100
Owner’s Manual – Installation and Operating Instructions
Please read this manual carefully before installation and use.
1. Installation Instructions
Separate the front panel from back panel by depressing the
tongue located in the top of the unit.
Pull the back panel out.
Line the back panel up against the wall or flat surface. Install
three screws as required.
Make electrical connections as shown on enclosed electrical
wiring connections table.
Install the cover to the back panel; first the two tabs on the
bottom and then the top tongue. Push until tight against the
wall.
