Meinberg DCF600USB, Руководство по установке

Страница: 27 / 31

Once the DCF600USB is operating normally, the following status messages will appear for DCF77 systems:
• Normal Operation
• Synchronized after last RESET
•
Clock is Synchronized
8.2 Starting the Time Service
To use the previously selected reference source to synchronize the clock of the connected PC, go to the "Setup"
menu and click on "Start Time Service".
Status Information:
The "Time Adjustment" tab serves as a quick reference to compare the time of the PC’s internal clock against
the time from the resource source (e.g., DCF600USB), and specifies the current difference between these two
clocks.
Status Information:
Reference Clock: Reference clock selected for PC synchronization
State of Time Service:
Active The reference clock is providing the computer with a reference time
Disabled The time service has been disabled
Waiting for Reference The time service has been started, but there is no connection with the clock
Time...
24 Date: November 29, 2021 DCF600USB