Meinberg CON/232/FO, Руководство пользователя

Страница: 21 / 22

3.6 CON/TTL/FOS
The fiber optic module CON/TTL/FOS converts an in-
put signal (TTL, RS-422 or FO) into one or more FO
(fiber optical) output signals for single mode.
CON/TTL/FOS-4
CON/TTL/FOS
TTL to FOS Converter
Standard variants
PPS, PPM, IRIG-B DCLS, 10MHz
CON/TTL/FOS: TTL In (BNC) to 1 x FO Out
CON/422/FOS: RS-422 In (DB9 male) to 1 x FO Ou
CON/FOS/FOS: FO In to 1 x FO Out
Option: up to 4 x FO Out
3.6.1 Technical Specification CON/TTL/FOS
Input Signal: TTL signal via BNC female connector
input impedance 10 kOhm
or
RS422 signal via DSub9 male connector
pin 5: GND, pin 7: +IN, pin 8: -IN
or
FOS singlemode FO signal via ST connector
minimum input level: 1
µ W (-30 dBm), wave length: 1310 nm
or
FO FO multimode FO signal via ST connector
minimum input level: 3
µ W (-25 dBm), wave length: 850 nm
Optical
Outputs:
up to four singlemode FOS outputs via ST connectors
for E9/125
µ m monomode fiber, wave length: 1310 nm
Launchable
output power:
typ. 15 µ W (-15 dBm) per output
Signal Delay: Delay of the electrical slope, detected with
CON/TTL/FOS and CON/FOS/TTL:
rising edge:
75 ns
falling edge: 70 ns
(plus the delay caused by the optical fiber: approx. 4,9 ns/m)
Data Rate max. 10 MHz
Signal Jitter: <1 ns
18 Date: 14th January 2020 FO CONVERTER