2.2.3.14 Panels
Some selected readings of the input signal may be displayed in the
form of panels.
2.2.3.15 Digital-I/O
The “Digital IO” menu opens a window in which the digital I / O may
be set and displayed.
Each channel may be independently configured as input or output.
After switch-on, all channels are configured as inputs.
If required, you can use channel D23 (pin 26) as an external trigger
input. In this case, the channel is always input and reserved for ex-
ternal trigger operation in conjunction with the Oscilloscope and
Logic Analyzer modules as well as the two data logger modes.
In the Logic Analyzer mode and the digital data logger all channels
are reserved for this function. Channels D0 to D15 and D23 are al-
ways inputs, the remaining channels D16 to D22 are outputs.
Their levels depend on the use of external level converters.
