Meiko UPster H 500 M2, Руководство по эксплуатации

Страница: 35 / 56

35 / 56 9760465
8.3.4 Emptying the washware
Beware
Danger of burns and scalding due to hot rinse water, washware and machine
parts
Contact with hot rinse water, washware and machine parts can result in
burns/scalding of the skin.
• Wear protective gloves if necessary.
• Let the washware cool down before emptying, if necessary.
• Let the machine cool down before touching machine parts, if necessary.
• Never open the machine door or hood during a wash cycle.
• Only open and close the hood/door using the designated handle(s).
,
After the programme ends, the control light above the wash key turns off and an
acoustic signal sounds.
1. Open door.
2. Carefully remove the rack.
3. Close door.
8.4 Shutting down the dishwasher
The dishwashing machine is closed and does not have a rack inside.
1. Press the On/Off button . All control lights turn off.
2. Press the wash key to start the self-cleaning programme.
The control light on the wash key is flashing. The rinse water is pumped out and
the wash chamber is sprayed with hot fresh water. After the programme ends, the
control light turns off.
After the end of the process, clean the machine, see chapter “Daily cleaning” on
page 49.