Operating instructions Glass-, utensil- and dishwasher
M-iClean U
Operation/use
9763258
52 / 72
Design and construction subject to change without prior notice!
9.7
Change authorisation level
Note
The dishwashing machine must be in
MACHINE OFF
mode.
1. Press and hold the Service access key for approximately three seconds.
2. Enter the service code for the required authorisation level.
3. Confirm the message.
Authorisation level 1 – user configuration level
Read settings (
service code: 10000
)
The user can view the user settings.
Read/modify settings (
service code 10001
)
The user can carry out all functions required for normal operation and configure the
settings.
Authorisation level 4 – extended configuration level
Read settings (
service code: 40000
)
The user can view the extended settings.
Read/modify settings (
service code 40044
)
In addition to the functions and settings for authorisation level 1, the operator can
view/edit all the relevant parameters for the dosing equipment. The i-menu shows all
variable parameters in the corresponding tabs (dosing system, wash programs).
