Meijer Jumbo RBK, Руководство пользователя

Страница: 11 / 13

round bale grab Jumbo RBK
– EN
11
8. Problems and solutions
The bale grab has relatively few moveable parts and damages are unlikely to occur when
used properly. Repair or replace damaged and worn parts immediately. Spare parts are
available at Meijer Holland.

Turn off the engine of the vehicle while you are fixing one of the below-
mentioned problems.

Turn off the power supply during welding.

Hydraulic fluid is a poisonous liquid that is harmful to the environment. Never try
to shut a leak with your hand. Fluid under high pressure easily penetrates
through skin and clothing and can cause serious injuries.
Problem Possible cause Solution
The hooks are
not moving. The hydraulic circuit of the bale grab is
not attached to the hydraulic system of
the vehicle. Attach the two hoses.
The hydraulic circuit of the bale grab is
not attached correctly. Exchange the wrongly attached
hydraulic hoses.
Malfunction in the hydraulic system of
the vehicle. Consult the manual of the vehicle.
The clamp arm is blocked. Look for the blockade and remove
it.