Meijer Holland Limo Hydra 15M, Руководство пользователя

Страница: 11 / 22

Bale collector Limo Hydra – EN 11
6. Operation and use
1. Adjust the bale guides
Before the use, the four red bale guides must be adjusted to the correct width of the
bales. Adjust the bale guides in such a way that the device can be operated optimally and
that the bales are moving smoothly on the machine. The two front bale guides should be
closer to each other than the last ones. This prevents blockage.
2.
Adjust flow control valve
The speed of the spiral rollers can be adapted to the capacity of the baler by adjusting the
flow control valve (photo I). Don't open it completely, as the rollers must be able to
rotate faster when the bales are being discharged. This acceleration is powered by the
latching valve that simultaneously opens with the tailgate (photo J).
3. Adjust spring tailgate
Adjust the spring (Photo K) in such a way that the tailgate will spring back to its ideal
position after the bales have been discharged. A spring that is to tight can cause the
tailgate to close to quickly during the release of the bales, because of this the bales won’t
be placed in the right position. This may also result in that the tailgate will be launched
back too hard in it’s initial position, in wich case it isn’t locked properly. Hereby the
tailgate will open with four bales in it already. It may also happen that the tailgate doesn’t
hit the flow control valve, in this case the machine will make the rollers rotate to quickly.
4. Adjust spring smaller roller
Adjust the spring (Photo L) in such a way that the smaller roller, after releasing the bales,
that will launch back in its starting position. To much tension on the spring can cause the
valve to close during the passing of the bales. Because of this the bales won’t be placed in
there optimal position on the back part of the Limo, the bales can get jammed in the
machine. If there is not enough spring tension the roller won’t return in its locked
position after releasing the bales, in this case the roller will release the next batch of bales
to early.
Photo I – flow control valve Photo J – latching valv