CashFlow
®
540 changegiver Pocket Guide
40
,
MEI., 1997
Float the coin tubes
Floating the tubes through the creditor
1. Press Mode + A, and insert change coins. When
the tubes reach the pre-set maximum float level,
further coins are routed to the cashbox.
Use the coin entry slots to replace any coin that
falls inadvertently through a tube, so that it is not
counted twice by the creditor.
2. Press A to return to normal operation.
Floating the tubes by hand
NOTE
:
Do not attempt to float up the tubes by
hand if the unit has an audit module fitted.
Float the tubes through the creditor.
1. Insert a full coin cassette, or remove the unit’s
cassette and fill the tubes to the float levels.
If the cassette is difficult to remove, release it and
tilt it forward. Push in the coin filling flap, and fill
tube A through the gap. Fill tubes B, C and D
through the coin entry slots.
2. Press Mode + Mode, replace the cassette, then
press Mode + A + B.
3. Insert samples of non-change coins to check that
they route to the cashbox.
4. Press A, B, C and D in turn to check that coins
are dispensed.
5. Press Mode + A and refloat the tubes through
the creditor.
When the pre-set float level is reached, further
coins are routed to the cashbox.
6. Press A to return the unit to normal operation.
The unit is now ready for use