4.3.2 Mains supply and touch voltage test settings
User preferred voltage options can be selected from here. Selected voltages will be saved and shown on screen in the
grey ribbon at all times. These voltages can be changed at a later time if required.
1. Press softkey 1 or 3 (arrows) to highlight the desired setting
2. Press softkey 2 to SELECT. When the required supply setting
is selected the EVCC300 will immediately return to the main
menu screen.
or
3. Select softkey 3 (NEXT) to advance to the next setting screen,
Language Settings.
4.3.3 Language setting
1. Press softkey 1 or 3 (arrows) to highlight the desired setting
2. Press softkey 2 to SELECT.
When the required supply setting is selected the EVCC300 will
immediately return to the main menu screen.
These settings can be changes at any time.
Refer to 6. Settings on page 36
11
First use set up of the EVCC300 and setting
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
