Megger EGIL, Руководство пользователя

Страница: 53 / 72

9.3 Running a
measurement
Running a single close (C) or open
(O) operation
1]
Connect the breaker as described in section
9.1 above.
2]
Run a breaker operation without measure-
ment by turning the OPERATE knob. This
tests the connection. Run the operation with
measurement by turning the MEASURE knob.
Running an Open-Close-Open
(O-C-O) operation
1]
Connect the breaker as described in section
9.1 above.
2]
Select O-C-O (open-close-open) operation
in the SEQUENCE menu by using the arrow
keys.
3]
Press ENTER to set the close and open delay
values. The default value is 300 ms (0.30 s) for
close pulse delay and 10 ms (0.01 s) for open-
ing pulse delay. Press
ENTER to continue.
4]
Set the pulse length values if needed. Press
ENTER to confirm your settings.
5]
Run a breaker operation without measure-
ment by turning the OPERATE knob. This
tests the connection. Run the operation with
measurement by turning the MEASURE knob.
Note The first measurement must be a single close or
open operation.
9.4 Reading the printouts
For more information about the printer, see Chapter
12 (The printer).
The first part of the printout shows administrative
data and test conditions.
The second part of the printout shows the result in
numeric and graphic form.
you can also view the results on the display if you
activate the DISPLAy option on the MAIN menu.
Option - End
BM0087OE ZP-BM01E EGIL 53
9 HOW TO MAkE A MOTION MEASUREMENT (OPTION)